Acoustics First Corporation. Materials to Control Sound and Eliminate Noise. TM
Products » Acoustical Bass Traps » Low Frequency Tuner

Low Frequency Tuner Acoustic Panel


Low Frequency Tuner Wall and Ceiling acoustic panels are designed for areas that require special control of low frequency sound without over-damping highs. This is one product with a truly "balanced" absorption across the entire audio spectrum. It is often used in critical listening rooms, music practice spaces, recording studios, home theaters and performance areas, and often in conjunction with standard panels.

∞ Provides balanced absorption
∞ Flexible vinyl membrane traps bass
∞ Reflects high frequencies

Construction: The core construction is a dimensionally stable 6-7 PCF glass fiberboard with resin hardened edge protection laminated with a special non-perforated vinyl member that allows selective acoustical transparency. The fabric finish is completely adhered to the face of the panel and returned to the back for a full finished edge. All corners are fully tailored.

Panel Size: 4'x10' (maximum size)

Thickness: 2 inch Core

NRC: 0.30

FINISH: Guilford of Maine FR701 2100 Series
              (other facings available)

Mounting: Installs using standard impaling clip method
                   (adhesive by others)



Product Code: AFLFT

  When requesting a quotation. please provide a list of sizes, quantities and a shipping address.
  Standard Colors:
  Guilford of Maine FR701 2100 Series
  Class A rating per ASTM E 84
  This product bears the Green Cross label for recycled content.  The acoustical substrate is certified on average to contain at least 35% recycled glass, with 9% post-consumer and 26% pre-consumer content.
Sound Absorption Coefficients per ASTM C423 Type D Mounting
Thickness 250 Hz 500 Hz 1000 Hz 2000 Hz SAA NRC
2" 0.32 0.42 0.27 0.18 0.32 0.30
Site Map  |  Products  |  About Us  |  Library  |  Project Gallery  |  Contact Us  |  Home